Haojing 
2022-12-27
First, glass bottle (Learn about other glass bottles) body deformation
Because the glass bottle in the molding mold has not been shaped in detail, at this time the drop temperature and influence temperature is too high will often make the glass jar collapse deformation, if the upper end of the bottle body is too heavy. Inadvertently the bottom of the bottle is not cooled to the temperature will be printed on the conveyor belt marks so that the bottom of the bottle is strong.
Two, glass bottle body material trace
Glass bottle groove mark is a common problem of glass bottle. It can appear unusually fine, some if working in refracted light ability to create inventions. The orientation often formed is the cork, the short plate and the shoulder, the bottle body and the bottom end of the bottle also often appear channel marks, at this time due to the temperature of the furnace caused by.
Three, the thickness of the glass bottle is not equal
If the temperature of laminated glass drops is not average in the process of production and processing, the unit viscosity of high temperature is small, and the unit friction resistance of low temperature is large and thick. There is also a difference in the temperature of the grinding tool. The high temperature side of the sandwich glass is cooled slowly and blown thin at will, while the low temperature side is blown thick because of the fast cooling of the sandwich glass.
Four, the natural environment of glass bottle crack
Crack has a variety of appearance design, some is a wrinkle, some is a thin wrinkle, the key reason for the formation of the drop due to low temperature, the drop is too long, the drop did not fall in the middle of the initial mold and adhere to the mold cavity wall and formed.
Five, the bubble
Glass bottle bubbles formed in the process of forming the system are often a number of large bubbles or a number of bubbles together, which is different from the average spread of bubbles of laminated glass itself.
